This is preliminary documentation regarding an unreleased feature and the details may change prior to availability.
One of the challenges of dealing with interoperability issues with SPs is maintaining all the custom configuration rules needed to drive the IdP's behavior in all kinds of different ways. Traditionally most of these kinds of settings are concentrated in the relying-party.xml file and involve defining "overrides" for SPs or groups of SPs, often through manually maintained lists of entityIDs.
As discussed in the RelyingPartyConfiguration topic in the section on dynamically-driven configuration, V3.3 introduced an advanced capability to produce these settings on the fly at runtime, which creates opportunities for more flexible configuration, at some cost in complexity. One of the techniques currently described in that section involves the use of metadata "tags" (a shorthand name for the
<mdattr:EntityAttributes> extension feature) to embed signals in metadata that can drive configuration. In the longer term, any hope for a simplified approach to configuration or even a GUI probably rests on a strategy of this general type.
V3.4 introduces a built-in layer of code and Spring wiring to enable the use of the metadata-driven approach to configuration in a systematic way that provides a set of conventions for tag names and values to use to drive a significant range of configuration settings. With a small amount of up-front adjustment to the relying-party.xml file, it's possible to enable comprehensive support for metadata-driven configuration that can be freely intermixed in most cases with more static settings as required.
Bear in mind that enabling this feature requires a total degree of trust and control over one's sources of metadata, because the information in the metadata can have a wide-ranging degree of impact on the behavior of the IdP, by design. It essentially off-loads pieces of your configuration to the metadata, with all that that entails.
All of these new features are optional and are essentially a "working example" of how to use the already-available features provided with V3.3 to do something useful. It is expected at the time of writing that an unofficial plugin may be available prior to the release of V3.4 to enable the same example features in the V3.3 release.
Support for this feature has been added to the runtime environment in a way that avoids overhead (and risk) if not used but allows for straightforward enablement on a per-profile basis. The existing parent beans used for defining relying party defaults, overrides, and profile configurations all have analogs with a ".MDDriven" suffix in their names. Changing the existing parent bean name by adding the suffix and reloading the configuration will cause the runtime to evaluate most of the commonly-used configuration settings by checking for appropriately-named "tags" in the SP's metadata before falling back to the default, or statically configured, value if no tag is found.
For example, if you would like to enable tag-driven configuration for SAML 2.0 Browser SSO, you can replace any reference to the SAML2.SSO bean with SAML2.SSO.MDDriven, as in this example:
Attribute / Property Convention
The "bridge" between the metadata and this feature is the naming and syntax of the attribute tags used to control the configuration properties in the IdP. As an implementation strategy this could be "brute forced" with arbitrary mapping dictionaries, but the supplied implementation takes the approach of automating a mapping between the names of settings and the identifiers used internally for the various profiles, and the names of the corresponding SAML Attributes in metadata for those profile/setting combinations.
Each setting has a "base" name matching its Java bean property name as would be used if the setting were explicitly configured in Spring. For example, the property set via
p:defaultAuthenticationMethods is named "defaultAuthenticationMethods".
The corresponding SAML Attribute for a setting is named by suffixing the "base" name of the setting to a profile URL that is defined by the Shibboleth software for each of the supported profiles.
The URLs are as follows:
It follows that the
includeAttributeStatement property of the "Shibboleth.SSO" profile configuration can be set via a metadata Attribute named " ".
As an additional convention, a setting can be configured for all profiles simultaneously by prefixing it with the URL "".
The supplied implementations support various built-in type conversions supporting a natural mapping between simple XML syntax and Java data types. The only XML syntaxes supported are "simple content" models involving an
<AttributeValue> containing only text content, but it is possible to apply specific
xsi:type designations that trigger more precise handling (such as enforcing numeric or boolean data). Different kinds of settings support particular XML syntaxes as described below.
|Setting Data Type||Supported XML Conversions||Notes|
|String||Untyped, string, boolean, integer, dateTime, base64binary|
Booleans are mapped to "0" or "1".
Dates are mapped to the Unix epoch, converted to String.
|Boolean||Untyped, string, boolean, integer|
Strings are processed as a valid XML boolean value (0, 1, true, false) or treated as false.
Non-zero integers are true, zero is false.
|Integer||Untyped, string, boolean, integer|
Strings are decoded via Integer.decode() method.
Booleans are mapped to 0 or 1.
|Long||Untyped, string, boolean, integer, dateTime|
Strings are decoded via Long.decode() method.
Booleans are mapped to 0 or 1.
Dates are mapped to the Unix epoch, converted to a Long.
|Double||Untyped, string, boolean, integer|
Strings are decoded via Double.valueOf() method.
Booleans are mapped to 0.0 or 1.0.
|Duration||Untyped, string, integer|
Strings are converted from the ISO Duration notation used throughout the software.
Integers are treated as a millisecond duration.
|List<?>||Untyped, string, boolean, integer, dateTime, base64binary||Supports multiple values and each value is converted to a String and then used to construct an object of the type specified for the property via a String-based single-argument constructor.|
|Set<?>||Untyped, string, boolean, integer, dateTime, base64binary||Supports multiple values and each value is converted to a String and then used to construct an object of the type specified for the property via a String-based single-argument constructor.|
|Bean||Untyped, string||Converted to a String used as a name of a Spring bean to build or access|
There are two ways to apply tags to metadata: directly and indirectly.
The direct method applies to cases in which you control the metadata or when the source of the metadata supports the inclusion of the necessary extensions. The tags simply appear within the metadata being loaded into the IdP using an
<mdattr:EntityAttributes> extension element:
The indirect method relies on a metadata filter to attach the tags at runtime after loading and verifying the metadata. This is useful for cases in which you want to rely on externally supplied metadata but still organize parts of your configuration around the metadata. One use for this is simply consistency: if you have both external and local metadata, you can drive the configuration with both.
The following examples illustrate possible
<Attribute> syntaxes that can be used to configure a variety of common features. The examples apply equally to either the direct or indirect methods of attaching the attributes to the metadata.
Signed Assertions vs. Responses
Enabling signed assertions for a particular SP is advisedly handled by setting the
WantAssertionsSigned XML attribute in metadata, but isn't always possible and sometimes has to be combined with disabling signed responses (or just for efficiency).
Setting idp.encryption.optional is usually a workaround for handling the majority of SPs without encryption support, but there are a couple of scenarios in which it's useful to be able to manually disable it. Some federations (InCommon for one, at least for the time being) have limitations such that SPs without encryption support are stuck registering keys they don't support. Some SPs support encryption but build in time-bombs by forcing flag day key rotations on all IdPs that cause outages or manual work. Or you may simply want to drive this more explicitly for only a subset of SPs and not as a global change.
Note that it may be helpful to make sure encryption also doesn't get used during logout, so the second tag may be useful.
There are metadata extensions that are meant to be used to signal algorithm support, but they're not widely used at this point. The most common scenario is to force SHA-1 for older systems. This relies on identifying the name of a Spring bean to use to supply an object of the appropriate type, in this case, a SecurityConfiguration object.
For other algorithm use cases, you would need to wire up an appropriate SecurityConfiguration bean to identify with the tag. Note that if you identify a bean of the wrong type, the system will detect and reject this.
NameID Format Selection
<NameIDFormat> elements in metadata (which can also be added at runtime with a filter) is the normal way to use metadata to select the Format to use, but the "unspecified" Format has to be triggered with a profile setting. That's not commonly needed, but it's easy to define a tag for in such cases (and if you prefer you can obviously designate any Format this way).
One concern is that any two SPs using it are only coincidentally going to want the same data, so this isn't always solely a matter of Format selection. In such cases, it may be necessary to add activationCondition properties based on SP to specific generators that are handling the same Format.
Some of the other profile settings are workarounds for bugs, e.g., omitting the
NotBefore attribute. This is not very common but easily tag-driven.
A more obscure example would be an SP that requires additional
<Audience> values in addition to its own entityID. This mainly demonstrates that some settings may be multi-valued.
Handling SPs that require MFA but can't request it requires IdP-side configuration, usually involving a couple of settings. The URL below is just an example, it has to be replaced by whatever
<AuthnContextClassRef> constant is used in a deployment to signal MFA, or possibly more than one.
Triggering consent based on the SP is pretty common.
The authorization intereptor flow is another case, though the checking logic would have to be extended for each different service/scenario. In the example, both flows are enabled.
A common use case is enabling SAML 1 for legacy systems, often combined with either enabling queries or attribute push (to eliminate the queries). This is not handled as well via this mechanism because by default one generally enables most profiles by default, and it's not practical to enable them and then try and disable them for all but a few SPs. The goal is the opposite, disable by default and enable the profiles for a few exceptions.
Therefore, the built-in wiring cannot accomodate this use case, but it's possible to do this in a couple of different ways, one that works in pre-3.4 versions by defining a relying party override, and one that avoids the need for an override but requires API changes specific to V3.4. A common tag can be used in both cases for consistency.
First, an example making use of the support for profile configuration activation conditions in V3.4. This is the same wiring that is provided by the system configuration for many of the other properties but is supplied here "by hand" in order to adjust the default value of the condition to "false" instead of "true".
Second, the override example that works for older versions using the same attribute tag for consistency.
|RelyingParty.MDDriven||RelyingPartyConfiguration||A template bean for use in defining metadata-driven RelyingParty overrides by hand|
|RelyingPartyByName.MDDriven||RelyingPartyConfiguration||A template bean for defining metadata-driven RelyingParty overrides based on matching by name|
|RelyingPartyByGroup.MDDriven||RelyingPartyConfiguration||A template bean for defining metadata-driven RelyingParty overrides based on matching by |
|RelyingPartyByTag.MDDriven||RelyingPartyConfiguration||A template bean for defining metadata-driven RelyingParty overrides based on matching |
|BrowserSSOProfileConfiguration||Default metadata-driven configuration for SAML 1.1 SSO profile|
|AttributeQueryProfileConfiguration||Default metadata-driven configuration for SAML 1.1 Attribute Query profile|
|ArtifactResolutionProfileConfiguration||Default metadata-driven configuration for SAML 1.1 Artifact Resolution profile|
|BrowserSSOProfileConfiguration||Default metadata-driven configuration for SAML 2.0 SSO profile|
|ECPProfileConfiguration||Default metadata-driven configuration for SAML 2.0 Enhanced Client/Proxy profile|
|SAML2.Logout.MDDriven||Default metadata-driven configuration for SAML 2.0 Single Logout profile|
|AttributeQueryProfileConfiguration||Default metadata-driven configuration for SAML 2.0 Attribute Query profile|
|ArtifactResolutionProfileConfiguration||Default metadata-driven configuration for SAML 2.0 Artifact Resolution profile|
|SSOSProfileConfiguration||Default metadata-driven configuration for Liberty ID-WSF Delegated SSO profile|
|CAS.LoginConfiguration.MDDriven||LoginConfiguration||Default metadata-driven configuration for CAS login prototol|
|CAS.ProxyConfiguration.MDDriven||ProxyConfiguration||Default metadata-driven configuration for CAS proxy login protocol|
|CAS.ValidateConfiguration.MDDriven||ValidateConfiguration||Default metadata-driven configuration for CAS ticket validation protocol|
|shibboleth.DefaultMDProfileAliases||List<String>||A built-in list of alternate URL "prefixes" to property names, this is used to automate the generation of property tag names that apply to all profiles at the same time.|
|shibboleth.MDProfileAliases||List<String>||An optional user-supplied list of additional URL prefixes to support custom property tag names|
|shibboleth.MDDrivenStringProperty||StringConfigurationLookupStrategy||Parent bean for defining new lookup strategies for string settings|
|shibboleth.MDDrivenBoolProperty||BooleanConfigurationLookupStrategy||Parent bean for defining new lookup strategies for boolean settings|
|shibboleth.MDDrivenIntProperty||IntegerConfigurationLookupStrategy||Parent bean for defining new lookup strategies for integer settings|
|shibboleth.MDDrivenLongProperty||LongConfigurationLookupStrategy||Parent bean for defining new lookup strategies for long integer settings|
|shibboleth.MDDrivenDoubleProperty||DoubleConfigurationLookupStrategy||Parent bean for defining new lookup strategies for double settings|
|shibboleth.MDDrivenDurationProperty||DurationConfigurationLookupStrategy||Parent bean for defining new lookup strategies for Duration settings|
|shibboleth.MDDrivenListProperty||ListConfigurationLookupStrategy||Parent bean for defining new lookup strategies for List settings|
|shibboleth.MDDrivenSetProperty||SetConfigurationLookupStrategy||Parent bean for defining new lookup strategies for Set settings|
|shibboleth.MDDrivenBeanProperty||BeanConfigurationLookupStrategy||Parent bean for defining new lookup strategies for arbitrary Spring bean settings|