Page tree
Skip to end of metadata
Go to start of metadata

File(s): conf/services.xml, conf/

Format: Native Spring

Legacy V2 File(s): conf/services.xml


The services.xml file is used to specify many of the other configuration files (or more generally, Spring Resources) to load to configure various important services within the IdP. The file provides a less granular way to identify the Spring beans containing the lists of resources, and also controls the dynamic reloading behavior of those services.

You might modify these files to:

  • change the resources used, or more commonly add additional resources to supplement built-in defaults
  • configure more specialized approaches such as Subversion resources or remote HTTP resources
  • control how often to check for changes and reload configurations, if at all

The services.xml file contains a series of "list" beans that specify the Spring Resources to load into various services. The lists are named with specific bean IDs (see below) that direct the resources into the various services. If you wish to supply your own resource lists without modifying the delivered lists, you may control the bean IDs used by modifying

Do not remove any of the beans from services.xml unless you alter a corresponding property in to direct the service to a different resource list bean, or the IdP will fail to initialize with an error referencing the missing bean.

Fail Fast

The fail-fast behavior, which can be adjusted by service, determines whether the IdP webapp context will initialize and serve clients if a particular service fails to initialize successfully. The point of this mechanism is to allow you to decide for yourself when problems should be discovered and how serious they should be treated. While it isn't the default, you may find it simpler when first starting out to enable fail-fast behavior globally while you work through mistakes.

Whether a given service succeeds or fails is ultimately an internal consideration, but generally we're talking about whether its configuration is valid and whether its pieces and parts themselves are considered to be successfully initialized. Often there may be individual fail-fast settings applying at the micro level that in turn dictate whether the surrounding service starts (and which then determines the overall result of the IdP startup process based on the service's fail-fast behavior).

As of V3.2, there are two levels of fail-fast properties that control service behavior (and described below). A global property called idp.service.failFast can be used to toggle all services to fail-fast at once (since the default is false for most, but true for a couple). In addition, or instead, you can control the behavior of specific services with properties specific to each service. The individual properties override the global setting, so you can mix and match.

Reloading Services

In addition to the "checkInterval" properties listed below to automatically reload services, you may reload a service at any time using the reload-service command line utility and the service ID. The service IDs are shown below in the Beans table (excluding the logging service, which is "shibboleth.LoggingService").

$ ./ -id shibboleth.AttributeResolverService

Alternatively, you may reload services by issuing a GET request to the following URL, assuming your client has access as defined in AccessControlConfiguration.

GET http(s)://[idp-base-url]/idp/profile/admin/reload-service?id=shibboleth.LoggingService



Beans defined in services.xml follow:

Bean IDTypeFunctionReloadable Service ID
shibboleth.RelyingPartyResolverResourcesjava.util.List<Resource>RelyingPartyConfiguration resources for a new or migrated installation.shibboleth.RelyingPartyResolverService
shibboleth.LegacyRelyingPartyResolverResourcesjava.util.List<Resource>RelyingPartyConfiguration using a deprecated V2 relying-party.xml file.shibboleth.RelyingPartyResolverService
shibboleth.MetadataResolverResourcesjava.util.List<Resource>MetadataConfiguration resources.shibboleth.MetadataResolverService
shibboleth.AttributeResolverResourcesjava.util.List<Resource>AttributeResolverConfiguration resources.shibboleth.AttributeResolverService
shibboleth.AttributeFilterResourcesjava.util.List<Resource>AttributeFilterConfiguration resources.shibboleth.AttributeFilterService
shibboleth.NameIdentifierGenerationResourcesjava.util.List<Resource>NameIDGenerationConfiguration resources.shibboleth.NameIdentifierGenerationService
shibboleth.AccessControlResourcesjava.util.List<Resource>AccessControlConfiguration resources.shibboleth.ReloadableAccessControlService
shibboleth.MessageSourceResourcesjava.util.List<Resource>Internationalizable user interface messages.N/A
shibboleth.CASServiceRegistryResources 3.2java.util.List<Resource>Resources containing ServiceRegistry beans to be reloaded.shibboleth.ReloadableCASServiceRegistry


Properties defined in follow:

idp.service.failFast 3.2BooleanfalseSet default fail-fast behavior of all services unless overridden by service
idp.service.logging.resourceResource path%{idp.home}/conf/logback.xmlLogging configuration resource to use (the reloadable service ID is "shibboleth.LoggingService")
idp.service.logging.failFastBooleantrueFail at startup if logging configuration is invalid
idp.service.logging.checkIntervalDuration0Time to notice changes to logging configuration and reload service.
A value of 0 indicates that the logging configuration never reloads
idp.service.relyingparty.resourcesBean IDshibboleth.RelyingPartyResolverResourcesName of Spring bean identifying resources to use for RelyingPartyConfiguration service
idp.service.relyingparty.failFastBooleanfalseFail at startup if RelyingPartyConfiguration is invalid
idp.service.relyingparty.checkIntervalDuration0Time to notice changes to RelyingPartyConfiguration configuration and reload service
A value of 0 indicates that the relying party configuration never reloads
idp.service.metadata.resourcesBean IDshibboleth.MetadataResolverResourcesName of Spring bean identifying resources to use for MetadataConfiguration service
idp.service.metadata.failFastBooleanfalseFail at startup if MetadataConfiguration is invalid
idp.service.metadata.checkIntervalDuration0Time to notice changes to MetadataConfiguration configuration and reload service
A value of 0 indicates that the metadata configuration never reloads
idp.service.attribute.resolver.resourcesBean IDshibboleth.AttributeResolverResourcesName of Spring bean identifying resources to use for AttributeResolverConfiguration service
idp.service.attribute.resolver.failFastBooleanfalseFail at startup if AttributeResolverConfiguration is invalid
idp.service.attribute.resolver.checkInterval     Duration0Time to notice changes to AttributeResolverConfiguration configuration and reload service
A value of 0 indicates that the attribute resolver configuration never reloads
idp.service.attribute.resolver.maskFailures 3.1BooleantrueWhether attribute resolution failure should silently produce no attributes (the V2 behavior), or cause an overall profile request failure event
idp.service.attribute.filter.resourcesBean IDshibboleth.AttributeFilterResourcesName of Spring bean identifying resources to use for AttributeFilterConfiguration service
idp.service.attribute.filter.failFastBooleanfalseFail at startup if AttributeFilterConfiguration is invalid
idp.service.attribute.filter.checkIntervalDuration0Time to notice changes to AttributeFilterConfiguration configuration and reload service
A value of 0 indicates that the attribute filter configuration never reloads
idp.service.attribute.filter.maskFailures 3.1BooleantrueWhether attribute filtering failure should silently produce no attributes (the V2 behavior), or cause an overall profile request failure event
idp.service.nameidGeneration.resourcesBean IDshibboleth.NameIdentifierGenerationResourcesName of Spring bean identifying resources to use for NameIDGenerationConfiguration service
idp.service.nameidGeneration.failFastBooleanfalseFail at startup if NameIDGenerationConfiguration is invalid
idp.service.nameidGeneration.checkIntervalDuration0Time to notice changes to NameIDGenerationConfiguration configuration and reload service
idp.service.access.resourcesBean IDshibboleth.AccessControlResourcesName of Spring bean identifying resources to use for AccessControlConfiguration service
idp.service.access.failFastBooleantrueFail at startup if AccessControlConfiguration is invalid
idp.service.access.checkIntervalDuration0Time to notice changes to AccessControlConfiguration configuration and reload service
idp.service.cas.registry.resources 3.2Bean IDshibboleth.CASServiceRegistryResourcesName of Spring bean identifying resources to use for CAS service registry configuration
idp.service.cas.registry.failFast 3.2BooleanfalseFail at startup if CAS service registry configuration is invalid
idp.service.cas.registry.checkInterval 3.2Duration0Time to notice CAS service registry configuration changes and reload service
idp.message.resourcesBean IDshibboleth.MessageSourceResourcesName of Spring bean identifying Spring message property resources
idp.message.cacheSecondsInteger300Seconds between reloads of message property resources

V2 Compatibility

A similar function was performed by the services.xml file in V2, but in V3 this file is now a native Spring bean file and the older services XML schema is not supported or used.

Additionally, the V2 ResourceFilter feature is also not supported, so if you're using the Property Replacement Filter feature, you will need to adjust at least some of your configuration files. In most cases (but not always) you can leverage the Spring property replacement mechanism by changing the syntax slightly.

Advanced Notes

  • No labels